By: seoteam seoteam On: March 18, 2021 In: Floor Polishing, floor sanding Comments: 0

When having a timber floor at home or workplace, it becomes necessary to hire a Floor Sanding and Polishing Company Geelong. Any type of floor requires good care and also maintenance after a few years to stay alive. Maintenance keeps the floors going for the long run and saves you from the new installation.

What is Timber floor sanding?

Floor sanding is the process that is performed for timber floors to remove the first layer or surface material of the floor as a part of maintenance. Your floors feel friction after great use, and the quality slowly dies after a few years. You may find scratches or holes sometimes. At this time, the sanding process becomes mandatory because it removes the surface layer in order to get a new coat done. This is a great way of maintaining your floor’s quality.

Floor Sanding in Geelong


While performing Timber Floor Sanding Geelong, there are certain precautions that need to be considered before you begin. Every work that involves technicality and equipment requires safety measures to perform things in a safe and professional manner. When you perform floor sanding, you get to deal with floor sanding machinery and coatings, along with potentially harmful fumes. Therefore, it is required to use protection. However, safety measures vary with different tasks involved in the sanding and coating processes.

Safety glasses and a dust mask – The first task often involves the punching of the nails. While performing the task, small shards of steel can become projectiles from nail heads or from the striking of the hammer to the punch head, and for that, safety glasses and a dust mask are necessary to wear. You may not realise but, fine particles can sustain in the air after being produced by the process even though most of the dust is collected by the machinery.

Dust fire hazard – When you dispose of the plastic bags that are storing sawdust, you need to take care because they may begin to combust. One of the main causes of that is when the drum machine has sanded over the top of a nail head, creating a spark, when dust collection leads to the dust starting to smoulder, this sparks along with the sawdust and air suction.

Toxic coatings hazard – When the floor coating is formulated, one and two-pack water or solvent-based polyurethane coatings are often included. Once you are exposed to these coatings, you may develop both short- and long-term effects on the respiratory system, the skin and eyes, among other health issues. You can avoid this by wearing a chemical respirator when applying these coatings. If you are male, then a clean shave is advisable to have to ensure a tight seal between your face and the mask. A good fit indicates higher safety.


Safety matters over everything. Whether you are performing Timber Floor Sanding Geelong or any other technical task, make sure to check all your safety briefs.