By: seoteam seoteam On: July 14, 2022 In: Floor Polishing, floor sanding Comments: 0

Cleaning your floors regularly is the best way to keep them looking good. This can include vacuuming every few days and mopping once per week to help prevent dirt and grime from building up on the surface of your floor. However, even with regular maintenance, there are still plenty of ways for it to look dull. cleaning might not be enough for floors, hire Floor sanding & polishing Melbourne company regularly to maintain the floor shine. Below are some factors that can make your floor look dull!

Dirt and Grime

Dirt and grime can build up over time, making your floor look dull. This is not the end of the world. It’s easy to clean up!

You can use a vacuum cleaner, mop or steam cleaner (just a suggestion) to remove dirt and grime from your floors. If you don’t have one of these cleaning supplies at home, it’s definitely worth buying some—they’re absolutely essential in keeping your floors looking fresh!

Drinks and Food Stains

To remove stains from your floor, you can use the following methods:

  • Use a commercial cleaner. These are available at stores, and they come in various forms—spray or scrub-on liquid cleaners are both common. The advantage of using a commercial cleaner is that it will be suitable for both hardwood floors and other types of wood. It should also be safe for pets who may walk through it.
  • Wash the floor with water and dish soap (or an all-purpose cleanser). If you’re washing only part of your floor (such as just one room), wiping down the rest is important; this way, there won’t be any dirt carried into other areas by foot traffic! To avoid streaks when drying out any excess water before applying waxes or polishes again later down the road, try using paper towels rather than cloth ones so there aren’t extra fibers left behind on top surface area throughout house/apartment complex – this could cause damage if not removed right away after mopping up excess moisture during cleaning process.”

Floor sanding & polishing Melbourne

Sweat and Saliva

Sweat and saliva are two other things that can make your floor look dull. The yellowish color of sweat often stains floors, so it’s important to wipe up any excess moisture from the floor as soon as possible.

Saliva is another culprit for dulling your floors. While saliva doesn’t leave a stain like sweat does, it will leave behind some greasy residue that you’ll want to wipe up before it soaks into wood or concrete and becomes permanent.

If you notice these stains, simply use a damp cloth or sponge with warm water to remove them. If they do not come off this way, try using bleach in a solution of one part bleach per ten parts water (10:1). This should lift out most organic matter without damaging the finish on your flooring materials too much; however if there are any significant marks left behind after cleaning with a 10% acid solution such as vinegar then it might be worth considering using an organic solvent such as acetone instead which won’t affect natural materials but would probably be more effective at bringing out those stubborn stains anyway!

Pet Hair and Fur

Pet hair and fur is a common problem for many people. If you have pets, the fur and dander that they leave behind can end up all over the floor of your home. This can be difficult to clean up since pet hair can be both sticky and flaky at the same time. Pet hair is also known to cause health problems such as allergies or asthma, so keeping it off of your floors is important if you have any allergies or respiratory issues.

Animal Drops

The most common cause of a floor looking dull is animal urine. The acidic nature of animal urine can corrode the floor, causing it to look dull or even rusty. Animal urine also stains floors and causes a bad smell. Not only that, but animal urine attracts insects, bacteria, and rodents which further make your floor look dull.

Clean your floors regularly

Cleaning your floors regularly can help make them look great.

  • Sweep or vacuum the floor at least once a week. Vacuuming will remove dirt and dust, but if you have hardwood floors, use a damp mop instead of a dry one so that you don’t damage the finish on your wood.
  • Use a soft scrub brush to clean dirty grout between tiles in bathrooms and kitchens.
  • Use a soft cloth (like terrycloth), microfiber cloth or hard bristle brush for general cleaning of most types of flooring including: carpeting, linoleum and vinyl tiles.

We recommend you clean your floor regularly. For example, once a week or once every two weeks. Remember to use the proper products for cleaning and polishing so that your floors don’t look dull after cleaning them. Consult Timber Floor Sanding Melbourne today for queries regarding Floor sanding & polishing Melbourne projects.