Professional Timber Restoration Melbourne You Can Trust
Timber Floor Sanding Melbourne provides complete floor restoration Melbourne services for residential and commercial properties. Whether your floors have years of wear, deep scratches, water damage, gaps, or an old finish that’s past its best, our restoration team can bring them back to life.
We handle every aspect of the restoration process in-house, from sanding and gap filling through to staining, recoating, and final finishing. No subcontractors, no shortcuts. Just experienced Melbourne tradespeople who take pride in delivering floors that look better than you thought possible.
Full Timber Floor Restoration Melbourne. What’s Included
Unlike a basic polish or buff, a full floor restoration involves stripping the floor back to bare timber and rebuilding it from the ground up. This is the right approach when your floors are heavily worn, damaged, or in need of a complete transformation.
Our floor restoration Melbourne service covers everything your floors need, we assess the full scope of work upfront and handle it all in a single engagement. You deal with one team from start to finish, and you get a consistent result across every room.
Our Floor Restoration Services
Sanding & Surface Preparation
We use professional drum and edge sanders to strip the existing finish and level the timber surface. This removes scratches, staining, paint overspray, and old coatings that have failed or yellowed. The result is a clean, smooth base ready for the next stage of the restoration. Our low-dust equipment minimises mess and keeps your home as clean as possible during the process.
Gap Filling & Timber Repairs
Over time, timber floors develop gaps between boards as the wood expands and contracts with Melbourne’s seasonal temperature changes. We fill gaps with a flexible filler mixed with timber dust from your own floor, ensuring a near-invisible match. We also repair damaged, cracked, or cupped boards where possible, replacing individual planks only when necessary to keep costs down and your floor’s character intact.
Staining & Colour Changes
Want to change the colour of your floors as part of the restoration? We offer a full range of staining options, from subtle tones that enhance the natural grain through to deep, dramatic finishes that transform the entire feel of a room. Staining is applied after sanding and before the final protective coat. We provide samples on your actual floor before committing so you can see exactly how the colour will look.
Recoating & Protective Finishing
The final stage of every restoration is the application of a high-quality protective coating. We offer polyurethane finishes in matte, satin, semi-gloss, and high-gloss, as well as oil-based options for a softer, more natural look. Each coat is applied with care and allowed to fully cure before the next is added. The result is a durable, even finish that protects your floors and looks exceptional.
Water Damage Restoration
Water damage is one of the most common reasons Melbourne homeowners seek floor restoration. Whether from a burst pipe, flooding, or prolonged moisture exposure, water-damaged timber often cups, swells, or stains. In many cases, professional sanding and restoration can save floors that appear beyond repair, saving you the cost and disruption of a full replacement. We’ll assess the extent of the damage and advise honestly on what’s achievable.
Commercial Floor Restoration
We restore timber floors in commercial spaces including offices, cafes, retail stores, gyms, and heritage buildings across Melbourne. Commercial restoration requires efficient scheduling to minimise downtime, and we’re experienced at working around business hours to deliver the result you need without disrupting your operations. We treat every commercial job with the same care and quality as residential work.
How Our Floor Polishing Process Works
Step 1: Free On-Site Assessment
We visit your property to inspect the floors in person. We assess the timber species, existing finish, damage extent, and what’s needed to achieve the result you’re after. We then provide a clear, written quote with no hidden extras.
Step 2: Sanding
We sand the floor using commercial-grade equipment, working from coarse to fine grits to achieve a perfectly level, smooth surface. Edge sanding ensures corners and borders are treated consistently with the main floor area.
Step 3: Repairs & Gap Filling
Once sanded, we address any gaps, cracks, or damaged boards. Gap filling is done using a flexible compound mixed with timber dust from your specific floor for the best colour match.
Step 4: Staining (if applicable)
If you’ve chosen a stain colour, this is applied now on the bare timber surface. We provide test patches on your actual floor for approval before proceeding with the full application.
Step 5: Coating & Finishing
Your chosen finish is applied in multiple coats with full drying time between each layer. We typically apply two to three coats depending on the product and the level of protection required.
Step 6: Final Walkthrough
We inspect the completed restoration with you before we leave. We want you to be completely satisfied with the result, if anything isn’t right, we address it before the job is signed off.
Get A Free Floor Restoration Quote Today
Ready to restore your Melbourne timber floors to their former glory? Contact Timber Floor Sanding Melbourne for a free, no-obligation on-site assessment. We service all Melbourne suburbs and surrounding areas. Call 0413 303 347 or submit our online enquiry form and we’ll be in touch within one business day.
Frequently Asked Question. Floor Restoration Melbourne
If your floors have surface scratches and the existing coating is still in reasonable condition, a buff and recoat may be sufficient. If the timber itself is scratched, the coating has failed in patches, or there’s significant damage, discolouration, or cupping, a full restoration is the right approach. We’ll assess this during your free on-site quote.
In many cases, yes. The extent of restoration possible depends on how long the floor was exposed to water and the degree of cupping or swelling. Minor to moderate water damage can often be fully remediated through sanding and refinishing. Severe structural damage may require board replacement. We’ll give you an honest assessment of what’s achievable.
A standard residential floor restoration typically takes two to four days depending on the floor size, the extent of repairs required, and the number of coating coats. We’ll provide a clear schedule with your quote so you can plan around the work.
Yes. Staining during restoration is one of the most cost-effective ways to dramatically change the look of your floors. Since the sanding stage prepares a bare timber surface, the stain can be applied evenly and consistently. We provide colour samples on your actual floor before you commit.
We recommend light foot traffic after 24 hours and furniture replacement after 48–72 hours. Full cure time is typically 7 days, during which you should avoid dragging heavy furniture or placing rugs on the floor. We’ll give you specific care instructions based on the coating used.
Yes, we have extensive experience restoring original timber floors in heritage-listed and older Melbourne homes. These jobs require additional care and expertise to preserve the character of the timber while bringing the floor back to its best. We’re familiar with the species and conditions common in Melbourne’s older housing stock.
