There’s no denying that floor sanding is one of the most hated parts of home maintenance, but it’s also one of the most necessary. Carpeted floors trap moisture, causing them to expand and contract. As they expand and contract, the carpeted areas buckle, resulting in unsightly lumps and bumps. If you’re not sure where to start, here are six important tips for getting started with Floor sanding Geelong.
Know the Different Types of Floor Sanding Tools
There are a few different types of floor sanding tools: the drum sander, the belt sander, and the random orbital sander. The drum sander is capable of handling both of these tasks. It’s slower than the belt or orbital sanders but can achieve better results. The belt and orbital sanders are faster but require more time for each pass. If you have to tackle this task in a tight space, you have to use either a belt or orbital sander because they’re smaller than a drum sander and can fit into tighter spaces. The type of sandpaper you use is also important. You should always start with 80-grit paper before tackling higher grits.
Start at the Edges
Start by sanding the edges of the floor. This is where it starts to buckle, and unprofessional-looking bumps can be seen. Sanding these areas only takes a few minutes and will help you avoid spending too much time in the middle of your floor.
Use a Sanding Block to Avoid Markings
The first step is to use a sanding block to remove all areas of the old finish. This will ensure that you don’t create any permanent markings on the floor. It’s also important to make sure that the surface is completely dry before starting if there are any spots that have been left wet, wait until they dry before proceeding.
Damp-Moisture Task
Damp-moisture tasks should be done as soon as possible after purchase because the longer the carpet is exposed to moisture in the air, the harder it will be to remove.
Wear Gloves and Eye Protection
When sanding floors, always wear gloves and eye protection. It’s not hard to imagine the damage that could be done to your hands and eyes if you weren’t wearing these safety items.
It’s always best to leave Floor sanding Geelong to the professionals. They know what they’re doing and can take care of any issues that arise. Additionally, a professional will make sure that the floor is fully cleaned before starting, which should help prevent dust from getting in your eyes and causing potential respiratory problems. In the end, it’s always best to hire a professional for this task because they have the proper equipment for not only the job but safety as well.