Floor sanding & polishing Melbourne is one of the most common home improvement projects. It can be done to give your floor a new look, remove surface defects or just refresh it.
There are many different types of sanders and polishers on the market today, but they only work if you follow proper procedures when preparing your home’s floor for sanding and polishing.
Clean the entire room
In order to prepare your Floor sanding & polishing Melbourne, you’ll need to clean the entire room. Remove all furniture in the area and vacuum the floor (or use a damp cloth if you’re feeling ambitious).
If there are any leftovers from your earlier sanding project, remove them as well. After vacuuming or wiping down the floor with a damp cloth, use a dry cloth to wipe away any remaining dust particles.
The final step is to thoroughly clean your floor with vinegar and water—this will make sure that it’s free of dirt before moving on to Step 2!
Remove all furniture from the room
One of the most important things you can do when preparing to sand your floor is to make sure that all furniture is removed from the room.
This includes end tables, nightstands and any other pieces of furniture. You should also clear off any rugs or area carpets that may be present in order to ensure that nothing gets damaged during sanding.
After you’ve removed all furniture from the room, it’s time to move on to electrical cords—and this includes vacuum cleaner cords!
When sanding your hardwood floors, it is imperative that they are free from any obstructions or hazards so as not to cause damage while working on them later. If there are any electrical cords present in the area where you plan on working later on, then these will need to be taken out of sight until after everything else has been done with preparation work done beforehand; otherwise, they could pose serious safety hazards for anyone working near them later!
Sand down your floor
Sanding the floor is the first step in preparing your floors for sanding and polishing.
Use a floor sander to remove any finish that has been applied to your floor. If you are unsure how much finish needs to be removed, feel free to contact your local home improvement store’s service department for advice on this matter.
After you have sanded down your floors, vacuum them with a vacuum cleaner in order to remove all dust particles from them. After vacuuming, use a tack cloth (or a damp mop) to make sure no more dust particles remain on top of the wood or tile grains underneath it!
Apply a protective sealer to your floor
Before you start any sanding, it’s important to apply a protective sealer to your floor. This will help protect against moisture and contaminants, as well as provide some added strength—especially if you want to use a polisher.
Different types of sealers are available depending on the material that was used to make your floors (for example, hardwood or concrete).
If you aren’t sure what kind of finish is appropriate, ask an associate at the hardware store where you buy it for advice about which one would work best for your space.
Polish your floor
If you’re interested in deep-cleaning your flooring, there are several machines that can help. A floor sander makes it easy to remove dirt and grime from your floors without having to use a lot of elbow grease.
Another option is a buffer or polisher, which works great for removing scratches and crevices from the surface of your hardwood flooring. If you have an older home with dull wood floors, this machine will bring back its original lustre by grinding off old finishings and then applying new ones.
If you want something even more powerful than a buffer or sander but don’t want anything too large or heavy to move around easily, consider getting yourself a scrubber instead—they function similarly but are smaller and lighter than buffers/sanders, so they’re easier to handle when cleaning up small messes like spills or crumbs left behind by children who love eating chips while watching TV on the couch!
In summary, you can prepare your Floor sanding & polishing Melbourne by removing all furniture from the room. Then make sure that the surface is clean and dry before applying the protective sealer.
Once you have applied this sealer, wait until it dries completely before proceeding with your next step, which would be sanding down any rough areas using a sander machine with fine grit paper attached to it.
After this step has been completed, then you can apply polish onto any remaining blemishes using an orbital sander machine with medium grit paper attached to it (this will result in less time needed than if using just one type of machine alone).
Finally, wipe down all dust particles off of your floor with a dry cloth, so they don’t get trapped inside later when finally walking barefoot on top again! Hire Timber Floor Sanding Melbourne experts and get dustless sanding machine service with quality polishing products to achieve the perfect look to your timber floors.