As the years pass, timber floors require floor polishing Geelong wide no matter where you live or how you took care of your timber floor. This would provide the new shine to the floors and keep them from exponential damage. The floors are polished either by DIY methods or by taking the help of professionals.
Professionals have the expertise, experience, foreknowledge, and training to provide exceptional Timber Floor Polishing Melbourne around. This is not the case if you attempt to do the floor polishing without any assistance from the experts.
This is why the room for error increases, and you end up making certain floor polishing mistakes, some of which are listed below.
-
Not Inspecting
One of the most important aspects to start with when polishing the floor is to inspect the floor. A variety of aspects of your floor can impact the floor polishing. It may be dirty, damp or harbour loose materials. Along with it, if you have sanded the floor, it can have an imperfection that you would require to eliminate before you polish the floor.
There can be the presence of major issues like loose floorboards, rot, fissures, and big scratches that could impact the end result of your polish. If you find any of these beforehand, ensure to eliminate all of them by getting them fixed by a professional.
-
Poor Quality Finish
After sanding your floor perfectly, if you scrimp on the floor polishing, it would be like using some scrappy screen guard on your brand new iPhone. Nobody wants to do that right. Why neglect the quality at the step when it would be required the most.
If you choose low-quality paint for your brand new home, in a couple of months, it will start peeling off, colour fades and so on. A similar thing happens with the polish too, if you compromise with the quality of polish just to save a few dollars, you would surely end up paying more if you have to re-polish it due to an undesired result. So, shop around for the best quality of polish to get an unmatchable shine to your sanded floor.
-
Not Sanding the Floor Enough
When repolishing the floor, it is necessary to sand the floor. Primarily to get rid of the old polish on the floor to make up the space for the new one. Along with it, you would also get rid of accumulated dirt in the scratches, discolouration and any moisture affected area. All of this is the reason your floor looks tired with each passing year.
Even if homeowners know this, they do not sand the floor enough in fear of overdoing it leaving traces of the old polish in the floor. You would not have a clean base to lay the polish on, so you would not end up getting the desired result of the floor polish.
Why worry about all of this when you can simply leave it all on the expert of Timber Floor Polishing Melbourne around?
